Tag Archives: One Crafty Contest

Washer Suncatcher/Wind chime

I made it through ANOTHER round of the One Crafty Contest! I still can’t believe I was voted in as a contestant let alone that I’ve made it so far! Thank you to everyone who has been voting and sending me kind words of encouragement. You can find all my past projects and read about my participation in the contest HERE.

DIY Washer Suncatcher/Wind Chime
The latest round required us to use glitter. My entry was this washer and cookie cutter suncatcher/wind chime. It was NOT, however, my first project, and was really only half of what I wanted my final entry to be.

DIY Washer Suncatcher/Wind Chime
(it’s  hard to make out the letters without the glitter coloring each letter)

I worked SO hard on garden art made out of washers. I spelled out the word “bloom” with different sizes of washers and made the curves of the letters into flowers. I had the whole thing glued together (I even super glued my finger to a cookie sheet in the process). I had the washers glittered, but then I moved it to keep it safely away from my kids, and the whole thing broke since the super glue wasn’t set yet! I had planned to make it the top of my wind chime instead of the rod I used. So instead, I added the cookie/fondant cutters to my final project so it wasn’t so plain. I guess it was meant to be though, because the final project was good enough to put me in the top 5!

This project was actually pretty easy, but really time consuming. It required A LOT of drying time.

DIY Washer Suncatcher/Wind Chime
I covered cookie sheets with aluminum foil and then put wax paper on top. I started by laying out the different sizes of washers until I had a pattern I liked. Then I decided how many colors of glitter to use and what order they would be in. I filled the center of each washer with Mod Podge. It worked best to fill it with a thin layer, but not so thin that it would pull away from the sides as it dried. To prevent drips, I filled a children’s oral syringe with the Mod Podge. It worked perfectly! I filled the cookie cutters the same way.

DIY Washer Suncatcher/Wind Chime
Then I sprinkled on the glitter and waited, and waited, and waited for it to dry. Because of the deadline for the contest, I ended up putting the cookie sheets in my oven on the lowest temperature to speed dry the Mod Podge. The cookie cutters were especially slow to dry, so they spent several hours in the oven! I would have preferred to let it all air dry. The oven made some of the wax paper fuse to the back of the washers. The ones that did air dry popped right off the wax paper.

DIY Washer Suncatcher/Wind Chime
(here you can see the wax paper that fused to the back of the washers and some undried glue in the cookie cutters)

When it was mostly dry, I shook off all the extra glitter. The Mod Podge dries clear, so it created a little window in the middle of each washer with suspended glitter (unfortunately the pictures don’t show this well). Then I laid out all the washers the way I wanted it to look in the end, but upside down so I could glue strong fishing line to the back of each piece.

DIY Washer Suncatcher/Wind Chime
I primed and spray painted a wooden dowel in a metallic silver to match the washers. I tied on each string of the wind chime, measured carefully so they were evenly spaced, and then glued each of the tied strings to the dowel so they wouldn’t slide around. All that was left to do was hang it up!

DIY Washer Suncatcher/Wind Chime

DIY Washer Suncatcher/Wind Chime
(So pretty! I actually used ultra fine iridescent cosmetic glitter for all the white pieces to give it extra sparkle!)

Remember, if you post about this project, please be sure to give me credit and link back to me or grab a button from the sidebar. Thanks!

Your opinions and thoughts mean a lot to me.  I would love for you to leave me a comment below.  Thanks for stopping by today!

Advertisements

4 Comments

Filed under DIY - Do It Yourself, One Crafty Contest, Spray Paint, Upcycled

Wet Canvas Silhouettes – Painting with Water

Wet Canvas Silhouettes - A water and acrylic painting technique I made this painting as an entry for round one of the 2013 One Crafty Contest. I’m so proud of how it turned out, and it was good enough to get me voted to the next round! A BIG thanks to those who voted!! Would you believe me if I told you I didn’t use a paintbrush? Ok, so I did use a foam brush to paint the black background, but the sunset was painted with water. What? Water? Yep! Keep reading, and I’ll tell you how!

tree12
First I needed to make my stencils to create the tree and jumping boy silhouettes.  I don’t own a Cricut or a Silhouette cutting machine (oh, how I wish I did!), so I freehanded the shapes on the back of vinyl and carefully cut them out with a sharp scissors.

(The in-progress shots aren’t the best quality since they were taken in bad lighting late at night.  It’s the best time to work, since both of my boys are sleeping!)

Hand sketched vinyl stencils
I painted my canvas completely black with a foam brush, let it dry, and put the vinyl stencils on.  I actually really liked how it looked at this point with the black and white contrast.  The contest required us to feature paint in our entry, so one layer of black paint wasn’t going to cut it!

Painting over stencils
I did a few things to ensure my stencils would come away with clean lines.  I used a credit card to smooth down the vinyl and get all the bumps and bubbles out.  I put a lot of pressure on the edges of the stencils to make sure they really stuck.  Then I painted another layer of black over the entire canvas and the stencils.  That way if any color was going to bleed under the stencil it would be the color that was already there!  This technique works well when you’re painting designs with painter’s tape too.  The second layer of paint also helped glue the stencils down and provided a barrier for the next step.

tree4
After everything dried, I used a spray bottle filled with water to completely soak my canvas.  I was a little nervous about this step not knowing if my stencils would hold on, but they did.  I squeezed my paint directly on the canvas and used the spray bottle as my paintbrush to push the paint around.  It’s amazing all the ways you can manipulate paint with water!  A light misting will blend colors, a sideways stream will move the paint, and a heavy soaking will streak the paint.  I had a lot of fun experimenting with the spray bottle. In the picture above, the paint is still wet and heavily soaked with water.  It took a really long time to dry!

tree5
Once the paint had started to dry, but before it was completely dry, I removed the vinyl stencils. Then I just let it dry the rest of the way. All that’s left to do is hang it up!

Wet Canvas Silhouettes - A water and acrylic painting technique

Wet Canvas Silhouettes

Wet Canvas Silhouettes

Wet Canvas Silhouettes

Wet Canvas Silhouettes

Wet Canvas Silhouettes

Here are some other canvas projects you might enjoy:
The Earth Without Art Wall Art DIY Wall Art- You Don't Have to be an Artist DIY Wall Art- Textured Mixed Media

Remember, if you post about this project, please be sure to give me credit and link back to me or grab a button from the sidebar. Thanks!

Your opinions and thoughts mean a lot to me.  I would love for you to leave me a comment below.  Thanks for stopping by today!

10 Comments

Filed under One Crafty Contest, Wall Art

One Crafty Contest

If you’ve been following along on Facebook or Google+ you know by now that I’ve been voted in as one of the contestants in the One Crafty Contest! I’m so excited to be a part of this!

Anyone who wanted to enter could submit a photo of a project they made. Voting was then open to the public to vote for their top 10 favorite projects. I feel so honored to have made the cut! I’m now 1 of 20 contestants.

Wire Wrapped Agate PendantWire Wrapped Agate Pendant
This was my entry.

There are 5 rounds to the contest. Each week we are told what our material for the round will be. It must be featured in our project. For example, the first round’s material is PAINT!

Voting is open each Monday. So be sure to vote for your favorites! The rules prohibit me from telling you which projects are mine, so hopefully I make it into your favorites! Only so many contestants will move on each round until a winner is announced. There are also winners per each round.

Even if I don’t make it past the first round, I’m still just as honored to be a part of it. There are a lot of talented ladies in the competition and I can’t wait to see all the crafts they come up with! Make sure to follow me on Facebook or Google+ to stay up to date on the competition and all things CraftandRepeat! Links are in the sidebar.


A huge thanks to Amy at One Artsy Mama for hosting this awesome competition! Make sure to visit her blog. She has some mad crafting skills.

4 Comments

Filed under One Crafty Contest